Subminimal NanoFoamer Lithium (Black)
Subminimal NanoFoamer Lithium (Black)
Ultra powerful milk frother with 3.7 V Li-ion rechargeable battery and two speeds. The NanoFoamer Lithium makes the best fine foam milk you can make without a steam wand.
The NanoFoamer Lithium is a milk frother with a 3.7 V Li-ion rechargeable battery. Make perfect microfoam in seconds without using a steam wand. The NanoFoamer has been completely redesigned and is available in two models. The NanoFoamer Lithium and the V2 that works on AA batteries.
Perfect latte art foam without an espresso machine
With the Subminimal NanoFoamer Lithium you can make microfoam suitable for latte art in seconds. The NanoFoamer is super easy to work with thanks to a unique impeller design that rotates. You can determine the right texture, fine microfoam or thick foam by means of the two different NanoScreens.
NanoFoamer Lithium is the perfect foamer for versatile use
Do you want café-quality milk foam with your manual espresso maker such as Flair or with a Bialetti? The Subminimal NanoFoamer Lithium is the ideal addition for perfect milk foam without an espresso machine. The microfoam is even suitable for latte art. Not only cappuccinos are possible, but it is also widely used for cocktails, chai latte, chocolate milk, etc. Due to its compact size and light weight, you can easily take it with you for good coffee on holiday.
Cleaning the Nanofoamer Lithium
The shaft, screens and the impeller can be rinsed under the tap. The housing is water resistant, so you don't have to worry.
Improvements NanoFoamer Lithium vs Nanofoamer V1
The Lithium version has all the improvements of the V2 version as listed below, but also has the following upgrades:
- Powerful Li-ion battery
A powerful 3.7V 1200Mah lithium-ion battery gives this product super powers up to 14k RPM and very high torque.
- Double speed
This NanoFoamer is so powerful that Subminimal had to slow it down, so it features a multi-touch switch to select one of two speeds.
- Battery Level Indicator
Four LEDs quickly show you when to consider charging.
- USB Type-C
USB-C is the connector of choice for the best electronics on the market today, so you can charge your NanoFoamer with any USB charger you already own.
Upgrades of the NanoFoamer V2 and Lithium version:
- Click-On NanoScreens
The new NanoScreens have a satisfying click attachment that makes them much more secure on the impeller. It also prevents kinking over time.
- Replaceable impeller
The impeller can now be replaced if the NanoFoamer makes an unfortunate fall.
- Improved material impeller
The impeller material has been upgraded to polycarbonate (still BPA-free and FDA certified), making it more resistant to the stresses of high-speed rotations in hot liquids.
- Improved waterproofing
Improved seals on the product and on the shackles and shaft.
- Better engine
The improved high speed motor is more powerful, built to tighter tolerances and even more reliable.
- Stainless steel housing
The motor housing is now made of brushed stainless steel for a much premium experience and a stronger interior
- More stable shaft
Tighter tolerances in the motor directly ensure shaft stability. This reduces vibrations and allows the impeller to rotate quickly
- Digital On/Off Switch
The upgraded digital switch is a feather-light on/off switch, so you can focus on the foam while holding the NanoFoamer as light as a pencil.
- Safety PCB
Automatic shutdown after 90 seconds to prevent the ultra-fast motor from overheating the housing.
- New battery housing
The internal design is just as beautiful as the outside, with the batteries fitting directly into the handle and connected with high quality spring loaded contacts.
- Reduced vibration
The new internal design is built to much tighter tolerances, keeping everything tight to reduce any vibration from the handle.
- Completely new technology
better in-house engineering with sonic welded components rather than click-mounted parts.
Two versions of NanoFoamer
The new NanoFoamer is available in two versions, namely the NanoFoamer V2 and the NanoFoamer Lithium with rechargeable battery.
Specifications NanoFoamer Lithium
Battery: 3.7V Li-Ion Battery (1300mAh)
Dual Speed (4k RPM Submerged)
Dimensions: 234 x 35 x 35mm
Weight: 135 grams
Rechargeable: via USB-C
Nanoscreens: Fine & Superfine
Impeller: Polycarbonate (Replaceable)
Includes protective sleeve and wall mount
In the package
- 1x NanoFoamer Lithium
- 1x USB-C to USB-C cable
- 2x NanoScreens
- 1x Protective cap
- 1x Wall holder with adhesive strip
- 1x User manual
- 1x A Certificate of Authenticity
- 1x Access code for the Masterclass
There are no reviews written yet about this product..